5.Pressing machine


used to produce a maximum length of 12m, Sandwich panels with a width of 1.2m and a thickness of 50~150mm. Main technical parameters, product thickness specification: 50~150mm, equipment maximum clamping pressure: 200T, lamination closi

used to produce a maximum length of 12m, Sandwich panels with a width of 1.2m and a thickness of 50~150mm. Main technical parameters, product thickness specification: 50~150mm, equipment maximum clamping pressure: 200T, lamination closing speed: 10~30mm/s, total power: about 15KW

Used to produce a maximum length of 12m, Sandwich panels with a width of 1.2m and a thickness of 50~150mm. 2. The composition of the equipment The equipment is composed of a roller frame, a main engine, a hydraulic drive system, a Teflon conveyor belt template, a template support, a template heating system, and an electronic control system. 2.1 Host The host consists of a frame, lifting beams, and base. 2.2 Hydraulic drive system The hydraulic drive system consists of a hydraulic station, 16 lifting cylinders, a set of pressure-maintaining pumps, and corresponding high-pressure oil pipes and valves. Power: 11KW 2.3 load template Specification: length 12.6m, width 1.5m, thickness 100mm, composed of welded steel plates. The carrier template is composed of a Teflon conveyor belt and a carrier template. There are 2 loading templates, one of which is a fixed loading template. 2.4 Carrier template heating system The carrier template heating system is composed of oil medium heating device, pump unit, pipeline and corresponding temperature control device. 2.5 Electric control system The electric control system is centrally controlled by an electric control cabinet, equipped with corresponding buttons, relays, temperature controllers, etc.

Parameters

Unit

Product thickness specification

50~150mm

Maximum clamping pressure of equipment

200T

Laminating closing speed

10~30mm/s

Range of coating width

0~1250mm

Total power About 15KW
 
Recommended
白丝精华榨汁